Course List (Public)

SP6000

Online course

This course provides a greater understanding of and appreciation for, the technology, science and business behind modern RF (Radio Frequency) communications.

Estimated study time: 6h 45m

Overall content duration: 5h 10m

SP6101

Online course

This course looks at the correct procedure for the installation of connectors onto transmission coaxial cables for wireless networks, using technical videos to show the step by step processes.

Estimated study time: 4h 45m

Overall content duration: 3h 40m

SP6103

Online course

This course discusses CNT braided coaxial cable & connectors, used widely in wireless microwave systems. It covers cable selection, transmission & termination with videos showing step by step processes.

Estimated study time: 2h 45m

Overall content duration: 2h 5m

SP6104

Online course

This short course looks at the RET ATC200 (Remote Electronic Tilt) system including the physical components and a step by step guide through configuring and running the USB Lite software.

Estimated study time: 1h 10m

Overall content duration: 55m

SP6105

Online course

This course covers the fundamentals of microwave transmission, microwave theory, microwave antenna selection and systems installation. This course replaces the classroom course previously held by the Andrew Institute.

Estimated study time: 4h

Overall content duration: 3h 5m

SP6107

Online course

This course introduces the HELIAX FiberFeed (HFF) Solution, part of the Andrew Wireless solutions. It covers the specification, installation and inspection of the HFF solution to Remote Radio Units (RRU).

Estimated study time: 1h 55m

Overall content duration: 1h 30m

SP6140

Online course

This course looks at the latest demands on wireless networks, network trends and products and how tuning and Remote Electrical Tilt (RET) Antenna technology can meet these challenges.

Estimated study time: 3 hrs

Webcast duration: 1hr

SP6160

Online course

New technology is making great bandwidth demands, including the latest 4G. This course looks at the latest antenna types, footprints, Remote Electrical Tilt, active components and load balancing software.

Estimated study time: 2 hours

Webcast duration: 1h:45m

SP6170

Online course

This course will provide a solid and detailed overview of Fiber optic technology, CommScope's relevant fiber solutions, fiber theory, installation and testing to support the move towards FTTA.

Estimated study time: 7 hours

Webcast duration: 3h:39m

SP6180

Online course

The SP6180 course looks at microwave site planning from the selection of tower and radio type, through to how to create a reliable link. This includes understanding microwave radio technology and how to provide optimum link performance and reliabilit

Estimated study time: 6h

Webcast duration: 3h 54m

ND6430

Classroom course

This interactive workshop is designed to train the students to be able to design, install and commission CommScope's ION-B, ION-M and Node A solutions.

ND6440

Classroom course

This certification course is designed to train the students to perform the installation and commissioning of ION-U DAS networks.

ND6443

Classroom course

This certification course is designed to train the students to set-up and commission an ION-E Master Unit and UAP (Universal Access Point).

ND6470

Classroom course

This certification course is designed to train the students to perform the installation of ION-M DAS networks.

ND6471

Classroom course

This certification course is designed to train the students to perform the Commissioning Process for DAS networks.

ND6472

Classroom course

This certification course is designed to train the students to perform the installation of ION-M DAS networks for public safety / TETRA. It also includes some Node A off-air repeater basics.

ND6473

Classroom course

This certification course is designed to train the students to perform the installation of ION-U DAS networks.

ND6474

Classroom course

This certification course is designed to train the students to perform the Commissioning Process for DAS networks.

ND6475

Classroom course

This certification course is designed to train the students to set-up and commission an ION-E CAN and UAP (Universal Access Point)

ND6450

Classroom course

This three-day, instructor-led technical certification course provides the technical information and hands-on experience required to install, commission, and maintain a CommScope DAS system.

ND6453

Classroom course

The purpose of this instructor-led training class is to familiarize the attendee with the use of the DAS Element Management System (EMS) for monitoring and troubleshooting.

ND6451

Classroom course

This two-day, instructor-led certification course enables iBwave users to efficiently design CommScope DAS (FlexWave Prism, FlexWave Spectrum, and InterReach Fusion) solutions using current vex and template files. Attendees will more effectively desi

ND6454

Online course

This online certification course consists of 8 elearning modules providing information on the sales, installation, and commissioning of the InterReach Fusion product.

SP6500

Online course

This course details the technology and systems associated with RF Wireless infrastructure. It covers the fundamentals from the terminology used through to understanding the components and what is required to achieve successful RF communication links.

Estimated study time: 5h

Webcast duration: 2h 58m

ND6476

Classroom course

This certification course is designed to train the students to install and set-up a Node A+ for cellular operator use.

SP6700

Online course

Gain expertise in Microwave path engineering with a mix of both theory and real world examples. Covers basic elements of a microwave path, the role of propagation in design, the elements of good path design, regulatory considerations and more.

Estimated study time: 3hr 40m

Webcast duration: 2hr: 37m

SP6910

Online course

This course covers wireless cellular infrastructure antenna theory in detail and the issues that surround antenna design and specification.

Estimated study time: 4 hours

Webcast duration: 2h:10m

ND6477

Classroom course

This certification course is designed to train the students to install and set-up a Node AM for cellular operator use in railways rolling stock applications.

ND6478

Classroom course

This certification course is designed to train the students to install and set-up a Node AM for public safety operations using TETRA / TETRAPOL e.a.

SP6920

Online course

New technology is making great bandwidth demands, including the latest 4G. This course looks at the latest antenna types, footprints, Remote Electrical Tilt, active components and load balancing software.

Estimated study time: 2 hours

Webcast duration: 1h:45m

SP1010

Online course

This course is part of a suite of courses that focus on Broadband Infrastructures and solutions and takes a detailed look at copper and fiber Drop cable solutions.

Estimated study time: 3 hours

Webcast duration: 2h:42m

SP1020

Online course

This course is part of a suite of courses that focus on Broadband Infrastructures and solutions and takes a detailed look at Outside Plant fiber solutions.

Estimated study time: 3 hours

Webcast duration: 2h:58m

SP1030

Online course

This course is part of a suite of courses that focus on Broadband Infrastructures and solutions and takes a detailed look at CommScope BrightPath™ solution for FTTX.

Estimated study time: 5 hours

Webcast duration: 4h:36m

SP1040

Online course

This course is part of a suite of courses that focus on Broadband Infrastructures and solutions and takes a detailed look at Trunk and Distribution Cables.

Estimated study time: 3 hours

Webcast duration: 2h:49m

SP1050

Online course

This course is part of a suite of courses that focus on Broadband Infrastructures and solutions and takes a detailed look at ConQuest® CIC (Cable In Conduit) product family.

Estimated study time: 3 hours

Webcast duration: 2h:11m

SP1100

Online course

This course provides broadband installers with knowledge and guidance in the key areas required to perform broadband drop cable installation and troubleshooting.

Estimated study time: 3 hours

Webcast duration: 2h:3m

SP3000

Online course

This cabling infrastructure course provides a complete foundation for the enterprise designer based on industry best practice and cabling standards. From initial design considerations, background knowledge then detailed design concepts, finishing wit

Estimated study time: 12h

Webcast duration: 10h:00m

SP3321

Online course

This is the foundation Design and Engineering course for SYSTIMAX solutions. It supports the SYSTIMAX warranty and provides a platform for Infrastructure Designers to continue on with specialized design courses.

Estimated study time: 30 hours

Webcast duration: 14h

SP3351

Online course

The course combines the recertification material for both D&E and I&M courses for you to re-qualify (original discipline/s only). The focus is on the latest SYSTIMAX Design and Installation changes and important revisions.

Estimated study time: 13hrs

Webcast duration: 9h:59m

ND3361

Classroom course

This classroom hands-on course teaches students the required SYSTIMAX termination and testing best practices and procedures. Allows approved Partner students to warranty SYSTIMAX sites for installation.

FC3361

FC course

This course is the Flexible Course (FC) version of the SYSTIMAX I&M (ND3361)that allows a student to be taught and qualified 'in-house' by a qualified instructor from within your own company.

SP3361R

Online course

This is a re-certification course for the ND3361 SYSTIMAX I&M course. It's been developed for installers, ensuring any updates made to SYSTIMAX products, termination methods and relevant standards are included.

Estimated study time: 6h

Webcast duration: 3h:30m

SP3500

Online course

Verification of cabling installation & performance requires understanding of field test equipment, test procedures & test analysis. This course covers field testing of copper & fiber optic cabling in buildings, data centers, OSP, FTTx, DAS & FTTA.

Estimated study time: 4 hours

Webcast duration: 3h:43m

ND3801

Classroom course

This classroom based NETCONNECT certification course teaches the latest installation and termination techniques to support the solution to ACT I level. If you prefer to take this course online or it is unavailable locally, refer to the SP3801.

SP3801

Online course

This course covers installing premises cabling systems for the CommScope NETCONNECT range of both copper and fiber products, including transmission basics, installation and termination and applicable standards.

Estimated study time: 7.5 hours

Webcast duration: 5h:0m

SP3801R

Online course

This CommScope NETCONNECT online installation training course is for those students that require re-certification of ACT I within 2 years. The course includes the latest update material to support successful solution installation.

Estimated study time: 5 hours

Webcast duration: 3h:05m

ND3802

Classroom course

This NETCONNECT certification course teaches how to certify the performance of installed premises cable plants to ACT II level in a classroom. If you prefer take this course online, or it is unavailable as a class locally, refer to the SP3802.

SP3802

Online course

This CommScope ACT II course looks at field test equipment for the verification of cabling installation/performance for both copper and fiber including test procedures and analysis in buildings/data centers.

Estimated study time: 8 hours

Webcast duration: 5h:30m

ND3803

Classroom course

This NETCONNECT certification course teaches you how to Design Premises Cabling to ACT III level in a classroom environment. If you prefer take this course online, or it is unavailable as a class locally, refer to the SP3000.

SP4210

Online course

The PON Design & Enginering course aims to provide an introduction to Passive Optical Networks, positioning & design. PON topology & advantages over traditional LANs & markets it can be used to maximum benefit.

Estimated study time: 1hr

Webcast duration: 56m

SP4400

Online course

The focus of this course is to take a detailed look at fiber optic technology within the Enterprise market and the associated CommScope fiber solutions with a specific look at SYSTIMAX products.

Estimated study time: 7 hours

Webcast duration: 4h:00m

SP4420

Online course

The Fiber Optic Specialist Course is designed to provide a comprehensive overview of fiber optic infrastructure transmission, construction, planning, installation, termination, and inspection and testing.

Estimated study time: 9 hours

Webcast duration: 7h:20m

SP4410

Online course

The focus of this course is to take a detailed look at OutSide Plant (OSP) Fiber optic methodology within our market and the associated CommScope fiber solutions.

Estimated study time: 5 hours

Webcast duration: 3h:02m

SP4700

Online course

It is the objective of the CommScope Infrastructure Academy to promote the very best education and 'in field' working practices. The SP4700 JDSU Get Fiber Smart course covers Fiber Inspection, Tier 1 and Tier 2 Testing.

Estimated study time: 3h

Webcast duration: 1h:43m

GL5554

Online course

This single webcast module is the pre-qualification for the GL5555 Certified imVision Support Specialist. It is mandatory for those NOT already qualified in ND5510, the Certified iPatch Support Specialist.

Estimated study time: 1 hour

Webcast duration: 16m

GL5555

Online course

This course covers installation and configuration of the SYSTIMAX imVision solution. It now includes the latest 2015 R2 SMv7.2 updates, to form the requirement for Certified imVision Support Specialist (CISS) status.

Estimated study time: 23h

Webcast duration: 10h 07m

GL5555R

Online course

This is the Recertification course for the GL5555 Certified imVision Support Specialist (CISS). It provides the latest updates for iPatch hardware and imVision System Manager software to v7.2

Estimated study time: 5h

Webcast duration: 2h 05m

SP5602

Online course

This course is designed to help you understand SYSTIMAX solutions and how they can help customers meet their needs and solve their problems and help you sell SYSTIMAX solutions more effectively.

Estimated study time: 5 hours

Webcast duration: 2h:34m

SP7700

Online course

This course looks at the advancing trend of intelligent buildings and the necessary cabling to cover the requirements for Building Automation Systems (BAS).

Estimated study time: 8h

Webcast duration: 5h:43m

SP7710

Online course

This design course focuses on current security and access control (SAC) systems, technology, standards, architectures and methodologies and the CommScope products that support them.

Estimated study time: 5h

Webcast duration: 4h:01m

SP8800

Online course

This course introduces data center design and overviews the SYSTIMAX solutions that can be deployed within this specialist infrastructure environment.

Estimated study time: 6h

Webcast duration: 4h:00

SP8810

Online course

This course takes Data Center design to a higher level of understanding providing an in depth look at specialist Data Center technologies, architectures, challenges and solutions.

Estimated study time: 8h

Webcast duration: 6h:30m

SP8820

Online course

This course looks in detail at the ever expanding range of CommScope's SYSTIMAX Data Center Solutions and looks at the advantages to both partners and customers of using these solutions in this environment.

Estimated study time: 8h

Webcast duration: 6h:26

SP8850

Online course

The SP8850 course covers Data Center infrastructure technology, design, installation and architecture. Learn to provide resilient platforms that can be upgraded to meet new and emerging higher speed technologies using pre-terminated cabling solutions

Estimated study time: 7h

Webcast duration: 6h:19m

SPCCCS

Online course

The focus of this course is to introduce CommScope coaxial products and solutions. It includes both coaxial transmission theory, applications such as Video and Security.

Estimated study time: 5 hours

Webcast duration: 1h:36m

SPUCI

Online course

This course is designed to assure that the installer is qualified to properly install the Uniprise enterprise infrastructure solution and products, both inside and outside plant.

Estimated study time: 20 hours

Webcast duration: 9h:28m

SPUCIC

Online course

This course is designed to take a student currently qualified in the CommScope SYSTIMAX Installation course, ND/FC3361 and build sufficient skills to support the CommScope Uniprise solution.

Estimated study time: 8 hours

Webcast duration: 5h:37m

SPUCIR

Online course

This course is designed to recertify a student already qualified in SPUCI, Uniprise Certified Installer, to revise the key content and continue support the Uniprise warranty in the field.

Estimated study time: 8 hours

Webcast duration: 5h:38m

SPUEND

Online course

This is the design course for the Uniprise solution as opposed to the Uniprise Certified Installer course which focuses on installation. This is suitable for designers and project managers.

Estimated study time: 20 hours

Webcast duration: 9h:58m

SPUSO

Online course

The Uniprise Solutions Overview course is designed to assure that the network designer/installer is aware of the full Uniprise solutions, their applications and differentiation.

Estimated study time: 12 hours

Webcast duration: 6h:56m

SP4400U

Online course

The focus of this course is to take a detailed look at Fiber optic technology within the Enterprise market and the associated CommScope fiber solutions with a specific look at Uniprise products.

Estimated study time: 8 hours

Webcast duration: 3h:45m

SBI101

Online course

An introductory level class providing an overview of Smart Building key concepts, terms, definitions and the elements of an open integrated building.

Estimated study time: 50 mins

SBI102

Online course

An introductory level class building on the 101 course focusing on the value, design and elements of open control networking for smart buildings.

Estimated study time: 1hr 30mins

SBI103

Online course

An intermediate level class building on the 101 and 102 course focusing on the system design and integration of smart buildings.

Estimated study time: 2h

Assessment duration: 8m

WR9101

Online course

5 webinars giving a basic understanding of Power, Radio Frequency, Cable, Optical and RFoG theory, termination and technology.

Estimated study time: 1hr 30mins

WR9411

Online course

This program focuses on the components and the installation process of FOSC 450 Fiber Optic Splice Closures.

Assessment duration: 15 mins

WR9412

Online course

This program focuses on the components and the installation process of FOSC 600 Fiber Optic Splice Closures.

Assessment duration: 15 mins

WR9413

Online course

This course focuses on the components and the installation process of Fiber Distribution Hub (FDH) 3000.

Assessment duration: 15 mins

WR9414

Online course

This FTTP program focuses on the components and the installation process for Multiport Service Terminals (MST), Drop Cables, and the DLX Fiber Optic Connector System.

Assessment duration: 15 mins

WR9415

Online course

This course focuses on the components and the installation process for Rapid Fiber Panels and FPX Panels.

Assessment duration: 15 mins

WR9416

Online course

This ODF program focuses on the components and the installation process for Optical Distribution Frame and Fiber Entrance Splice solutions NG4access, LSX and Fiber Entrance Cabinet FEC.

Assessment duration: 15 mins

WR9440

Online course

This webinar provides a technical briefing on Wide Band Multimode fiber (WBMMF) and the transition towards Shortwave Wave Division Multiplexing (SWDM).

Estimated study time: 40 minutes

WR9301

Online course

A 15 minute video giving a basic understanding of recommendations for management of patch cords in frames and cabinets.

Estimated study time: 18mins

WR9350

Online course

A comprehensive set of Fluke videos giving a basic understanding, set up and operation of the DSX-5000, OptiFiber Pro, CertiFiber Pro and FiberInspector Pro test equipment.

Estimated study time: 106 mins

WR9601

Online course

A webinar giving an overview and installation of 1/2 inch 50 ohm coax cables and connectors used for in building wireless installations

Estimated study time: 30 mins

WR9616

Online course

Optical PIM Tester user training provides the student with a step-by-step overview of how to test for PIM via the Common Public Radio Interface (CPRI), utilizing CommScope’s Optical PIM Tester.

Estimated study time: 1 hour 30 mins

Assessment duration: 10 mins

WR9631

Online course

A series of on-line training sessions highlighting the essential features of ION-U: ION-U System Overview; Designing ION-U in iBwave; and System Configuration Tool (SCT).

Estimated study time: 1h 10mins

WR9632

Online course

This training session provides the student an overview of ION-B, its primary components and system architecture. System design examples are included in the training session.

Estimated study time: 41mins

WR9633

Online course

This set of training sessions aims to give the student an understanding of the ION-E system, its architecture, and major hardware components.

Estimated study time: 40mins

WR9634

Online course

A series of on-line training sessions providing an overview of the ION E Software.

Estimated study time: 30mins

WR9635

Online course

This presentation provides an overview for CommScope's ION-M DAS platform.

Estimated study time: 40 minutes

WR9801

Online course

3 webinars giving a basic understanding of DCIM, iTRACS CPIM suite of software solutions and the CPIM Sales Playbook, with a view to pre-qualifying CPIM customers.

Estimated study time: 1h:30m